I like working with clay, so this is pretty cool. It might have been made on a pottery wheel, then let dry a little, and was finished by pressing the templates into the sides.
This is a really beautiful piece! I think that it was made starting with a base then using coils and smoothing out the edges. I think they pressed on the textures after the piece was made. Gracie Kate
I think it was made on the wheel but the design would have been hard to create because it would be very top heavy. It looks difficult to make but at the same time its really cool. -Garrison Hotchkiss-
It looks like the shape was molded by hand on a pottery wheel and the inscribed details were etched in afterwards with a small tool. ~Blake Barfield 6th period
I like the Aztecy design imprinted on the outside. Probably took multiple coils of clay and smoothed them together by slipping and scoring, then they probably took a texture pattern and created the external design Savannah 5th
I think this was made on a pottery wheel and then the engravings were done by hand with a pen-shaped tool. I don't think this serves any purpose other than as a decoration.
I think it looks like a flower a little and is purely decorative. It's very wide at the top and narrow at the bottom, and has a strange rim shape that I doubt it is for eating or filling with water since it would fall over much easier than others. The design on the outside suggests this as well since it is not needed for using the pot, and is for decoration. It may have been made by taking a ball of clay, pinching a hole in the middle, and thinning the sides out till the desired shape emerged. It is unlikely that it was made on a potters wheel since Native Americans had not invented such technology at that point.
It looks like one of those coil pot things, they probably did that, then smoothed it and added the patterns later, with a template or by hand. -Caroline Hague
This is a really cool piece! I think they used the coiling method just like we are in class. It was smooth during the coiling process, then a pattern template was used to create this unique vase.
I know hat probably took a while definitely putting all of those designs in there, and it was made by stacking clay on top of each other and smoothing it out for the nice surface. - Ja'la Hughes
this clay creation seemed to take along time to make but I think it was made on one of those spinning pottery wheels. to make this you need a little talent because a bowl is hard enough to make let alone a big clay creation like this one. I think the patterns look pretty random but still cool.
I think it was created on the spin wheel and as it got tall enough I think the designs were hand crafted in to what they wanted and how they wanted it. This is pretty cool and unique.
I hope to make my pot look similar to that. The top must have been difficult to make though. He had to make sure that the clay wouldn't be too thin. The pattern imprinted on it is very interesting as well
go to website o0b67d6u16 louis vuitton replica replica bags and watches y7q51m6v18 replica bags lv replica gucci o5j12l1e30 replica bags online shopping this content h0b77p9g50 high replica bags replica bags sydney d6l80i1s07
I like working with clay, so this is pretty cool. It might have been made on a pottery wheel, then let dry a little, and was finished by pressing the templates into the sides.
ReplyDeleteThis is a really beautiful piece! I think that it was made starting with a base then using coils and smoothing out the edges. I think they pressed on the textures after the piece was made.
ReplyDeleteGracie Kate
I think it was made on the wheel but the design would have been hard to create because it would be very top heavy. It looks difficult to make but at the same time its really cool.
ReplyDelete-Garrison Hotchkiss-
It looks like the shape was molded by hand on a pottery wheel and the inscribed details were etched in afterwards with a small tool.
ReplyDelete~Blake Barfield 6th period
I like the Aztecy design imprinted on the outside. Probably took multiple coils of clay and smoothed them together by slipping and scoring, then they probably took a texture pattern and created the external design
ReplyDeleteSavannah 5th
I think this was made on a pottery wheel and then the engravings were done by hand with a pen-shaped tool. I don't think this serves any purpose other than as a decoration.
ReplyDeleteI think it looks like a flower a little and is purely decorative. It's very wide at the top and narrow at the bottom, and has a strange rim shape that I doubt it is for eating or filling with water since it would fall over much easier than others. The design on the outside suggests this as well since it is not needed for using the pot, and is for decoration. It may have been made by taking a ball of clay, pinching a hole in the middle, and thinning the sides out till the desired shape emerged. It is unlikely that it was made on a potters wheel since Native Americans had not invented such technology at that point.
ReplyDeleteI think this was spun on the pottery wheel and then stamped with the design templates.
ReplyDelete-Kevin Moreau
I think it loves very unique and neat. It was made by spinning they clay on pottery wheel.
ReplyDelete-Kyle Bradley
i think it was a slab that was stamped with designs.
ReplyDeleteI think that the clay was spun and then they stamped it with a template.
ReplyDeleteIt looks really really old. It looks like they coiled it on top of each other then stamped it with templates.
ReplyDeletethis was probably made on some type of pottery wheel. it looks cool but pretty fragile.
ReplyDeleteIt looks like one of those coil pot things, they probably did that, then smoothed it and added the patterns later, with a template or by hand.
ReplyDelete-Caroline Hague
This pot is really cool. I think that it was made the same way we are making ours then they took a pin and drew cool designs on it later fired.
DeleteI think the shape was made first using one of the rotating things, then the pattern was put on afterwards.
ReplyDelete- Sam Anderskow
This is a really cool piece! I think they used the coiling method just like we are in class. It was smooth during the coiling process, then a pattern template was used to create this unique vase.
ReplyDelete- Anna Jones
It was probably made on a pottery wheel.After that they probably put the pattern on.
ReplyDelete-Allie Parkerson
I know hat probably took a while definitely putting all of those designs in there, and it was made by stacking clay on top of each other and smoothing it out for the nice surface.
ReplyDelete- Ja'la Hughes
this clay creation seemed to take along time to make but I think it was made on one of those spinning pottery wheels. to make this you need a little talent because a bowl is hard enough to make let alone a big clay creation like this one. I think the patterns look pretty random but still cool.
ReplyDelete- Nathan Daniell
I think it was created on the spin wheel and as it got tall enough I think the designs were hand crafted in to what they wanted and how they wanted it. This is pretty cool and unique.
ReplyDeleteI hope to make my pot look similar to that. The top must have been difficult to make though. He had to make sure that the clay wouldn't be too thin. The pattern imprinted on it is very interesting as well
ReplyDeletethis is a pot that is mad of clay, and each design is hand drawn usually on the pot, it is a beautiful thing to make if you have the skills to make it
ReplyDeleteI think this was made with the same way as we are.
ReplyDeleteRolling coils and they after they build it i think they used texture plates to do the outside.
looks like a coil pot then the design cut into the sides and top
ReplyDelete-justin hobbs
ReplyDeleteI like how it opens up uniquely at the top and the texture of it on the outside, it also doesnt look like its a very thick pot
ReplyDelete-ryan
ReplyDeleteI dont know how it was made but it looks cool
ReplyDelete-Chancellor Newsome
this looks pretty cool, it was probably made on the pottery wheel then pressed with templates
ReplyDeletebrandon cox
I think it looks really cool. I think it's made with different layers of coils of clay you stack on one another and then you smooth them all together
ReplyDeleteIt looks very interesting. Must have been made with slabs of clay with imprinted designs in them, and then connected together.
ReplyDelete-Christian Holcomb
lebron shoes
ReplyDeletegoyard
balenciaga
mbt shoes
balenciaga shoes
nike max
nike air max 270
canada goose
supreme new york
adidas tubular
go to website o0b67d6u16 louis vuitton replica replica bags and watches y7q51m6v18 replica bags lv replica gucci o5j12l1e30 replica bags online shopping this content h0b77p9g50 high replica bags replica bags sydney d6l80i1s07
ReplyDelete